Gibson Neck in good condition. No cracks. All original. This is how we received it. I think this is from an LG-0 or LG-1, not sure.
Truss rod works.
Finger nail divots filled.
The gear head was neatly drilled for 21/64" OD tuner bushings. (Measured with drill bit shank.) These are readily available from Stewmac.
Fret board is some kind of rosewood. Mother of pearl dot markers. Side markers are ??
No truss rod cover and no tuners.
There are some knock outs where the frets were removed.
I would say the back was refinished. They did a nice job. Needs buffing.